Arty S7: Spartan-7 FPGA Board for Hobbyists and Makers

Arty S7: Spartan-7 FPGA Board for Hobbyists and Makers

Запросить цену


Product Description

Vivado Design Suite voucher not included — Vivado Design Suite Edition is available for free download (Vivado WebPACK). 

The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists.

The Spartan-7 FPGA offers the most size, performance, and cost-conscious design engineered with the latest technologies from Xilinx. Putting this FPGA in the Arty form factor provides users with a wide variety of I/O and expansion options. Use the dual row Arduino® connectors to mount one of the hundreds of hardware compatible shields available, or use the Pmod ports with Digilent’s pre-made Pmod IP blocks for a more streamlined design experience. Arty S7 was designed to be MicroBlaze ready and comes out of the box ready to use with Xilinx’s WebPACK licensing. 

Support Materials

DatasheetSchematics (Rev. E PDF)

For all other material:

Resource Center


Arty S7 block diagram.


The official distribution channel for the Arty S7 board is through Avnet and Digilent only. For this reason, we cannot provide distributor discounts for the Arty S7 board.


  • Arty S7 comes in two FPGA variants: Arty S7-25T features Xilinx XC7S25-CSGA324. Arty S7-50T features the larger Xilinx XC7S50-CSGA324. Arty S7 has the features listed below:
  Arty S7-25T Arty S7-50T
FPGA part XC7S25-CSGA324 XC7S50-CSGA324
1 MSPS On-chip ADC Yes Yes
Logic Cells 23,360 52,160
Slices 3,650 8,150
Flip-flops 29,200 65,200
Block RAM (Kbits) 1,620 2,700
Clock Management Tiles 3 5
DSP Slices 80 120
  • Internal clock speeds exceeding 450MHz;
  • On-chip analog-to-digital converter (XADC).
  • Programmable over JTAG and Quad-SPI Flash
  • System Features:
    • 256 MB DDR3L with a 16-bit bus @ 650 MHz
    • 128 Mbits Quad-SPI Flash
    • 100 MHz External Clock 
    • USB-JTAG Programming circuitry (USB Micro cable required, NOT INCLUDED). 
    • Powered from USB or any 7V-15V source
  • System Connectivity:
    • USB-UART Bridge
  • Interaction and Sensory Devices
    • 4 Switches
    • 4 Buttons
    • 1 Board Reset Button
    • 1 FPGA Reset Button
    • 4 Green LEDs
    • 2 RGB LEDs
  • Expansion Connectors:


  • Arty S7 Board Spartan-7 FPGA (Micro USB cable not included)
  • Digilent cardboard packaging with protective foam